• 高端性能范围内的高性能 CPU
• 适用于对性能要求很高的工厂
• CPU 416-3 PN/DP 中集成了 PROFINET 功能

CPU 416-2, CPU 416-3 and CPU 416-3 PN/DP are powerful SIMATIC S7-400 CPUs.

The integrated PROFIBUS DP interfaces in the CPU 416-2 and CPU 416-3 make it possible to connect directly to the PROFIBUS DP fieldbus as a master or slave.

An additional DP master system can be connected to the CPU 416-3 and CPU 416-3 PN/DP using the IF 964-DP interface module.

The integrated PROFINET interface of the CPU 416-3 PN/DP includes switch functionality when the ERTEC 400-ASIC is used. This forms the basis for providing two externally accessible PROFINET ports. In addition to hierarchical network topologies, this also enables the creation of line structures in the new S7-400 controllers.

Note:
Only the 6ES7 964-2AA04-0AB0 interface submodule may be used.

Both CPUs are equipped with the following:

• Powerful processor:
  The CPUs achieve instruction execution times as low as 0.03 μs per binary instruction.
• CPU 416-2: 5.6 MB RAM (of which 2.8 MB each for program and data);
  CPU 416-3: 11.2 MB RAM (of which 5.6 MB each for program and data);
  CPU 416-3 PN/DP: 11.2 MB RAM (of which 5.6 MB each for program and data);
  fast RAM for parts of the user program relevant to execution.
• Flexible expansion:
  Up to 262144 digital and 16384 analog inputs/outputs.
• Multi-point interface MPI:
  With the MPI it is possible to establish simple networking of max. 32 stations at a data transmission rate of up to 12 Mbit/s. The CPUs can establish up to 44 connections to stations of the communications bus (C bus) and the MPI.
• Mode selector switch:
  Designed as toggle switch.
• Diagnostics buffer:
  The last 120 fault and interrupt events are retained in a ring buffer for diagnostic purposes. The number of entries can be parameterized.
• Real-time clock:
  The date and time are appended to diagnostic messages of the CPU.
• Memory card:
  For expansion of the integrated load memory. RAM and FEPROM cards (FEPROM for retentive storage) are available
• Combined MPI/DP interface and integrated PROFIBUS DP interface (CPU 416-2 and CPU 416-3):
  The PROFIBUS DP master interface allows a distributed automation configuration offering high speed and ease of use. From the user's point of view, the distributed I/O is treated as central I/O (same configuring, addressing and programming).
  Mixed configuration: SIMATIC S5 and SIMATIC S7 as PROFIBUS master according to EN 50170.

CPU 416-3 and CPU 416-3 PN/DP also include:

• A module slot:
  An additional PROFIBUS DP master system can be connected via the IF 964-DP interface module.

CPU 416-3 PN/DP additionally includes:

• PROFINET interface with 2 ports (switch):
  • PROFINET I/O, 256 IO devices connectable
  • PROFINET CBA

• Block protection:
  A password concept protects the user program from unauthorized access.
• Integral HMI services:
  The user only has to specify the source and destination of the data with HMI devices. The data are then transported cyclically and automatically by the system.
• Integrated communications functions:
  • PG/OP communication
  • Shared data communication
  • S7 standard communication
  • S7 communication
• Firmware update using network

CPU 416-3 PN/DP additional:

• Open communication over TCP/IP, UDP and ISO-on-TCP (RFC1006)
• Distributed intelligence in Component Based Automation (CBA) on PROFINET
• Additional diagnostic options with integrated web server

Parameterizable attributes

The STEP 7 tool "Hardware Configuration" can be used to program the properties and response of the S7-400 including the CPUs, e.g.

• Multi-point interface MPI:
  • Definition of station addresses.
  • Startup/cycle behavior
  • Stipulation of the maximum cycle time and communications load
• Address assignment:
  Addressing of I/O modules.
• Retentive ranges:
  Definition of the number of retentive bit memories, counters, timers, data blocks and clock memories.
• Size of the process image, local data.
• Length of the diagnostics buffer
• Protection level:
  Definition of access authorization for program and data
• System diagnostics:
  Definition of the handling and scope of diagnostic messages
• Timed interrupts:
  Setting of periodicity

CPU 416-3 PN/DP additional:

• PROFINET interface
• Parameterization of time synchronization using NTP procedure

Indication and information functions

• Status and error indicators:
  LEDs indicate internal and external errors and operating states such as RUN, STOP, Restart, Test function, for example
• Test functions:
  The programming device can be used to display ** states in program execution, modify process tags irrespective of the user program, read out the contents of stack memories, run separate program steps and inhibit program components
• Information functions:
  The programming device can be used to provide the user with information on the memory capacity and operating mode of the CPU and the current utilization of the working and load memories

商品编号		6ES7416-2XP07-0AB0	6ES7416-3XS07-0AB0	6ES7416-3ES07-0AB0
		CPU 416-2，MPI，PROFIBUS，8 MB	CPU 416-3, 16 MB, 3 INTERFACES	CPU416-3 PN/DP，16 MB，3 个接口
一般信息
产品名称		CPU 416-2	CPU 416-3	CPU 416-3 PN/DP
硬件功能状态		01	01	01
固件版本		V7.0	V7.0	V7.0
工程组态方式
● 编程软件包		STEP 7 V5.4 或以上版本，带 HSP 261	STEP 7 V5.4 或以上版本，带 HSP 261	STEP 7 V5.5 或以上版本，带 HSP 262
CiR - 在 RUN 模式下组态
CiR 同步时间，基本负载		100 ms	100 ms	100 ms
CiR 同步时间,每个 I/O字节从站的时间		10 μs	10 μs	10 μs
电源电压
额定值 (DC)
● 24 VDC		-；通过系统电源供电	-；通过系统电源供电	-；通过系统电源供电
输入电流
从背板总线 5 VDC，典型值		0.9 A	1.1 A	1.3 A
从背板总线 5 VDC，较大值		1.1 A	1.3 A	1.6 A
从背板总线 24 VDC，较大值		300 mA；在每个 DP 接口处150mA	450 mA；在每个 DP 接口处150mA	300 mA；在每个 DP 接口处150mA
从接口 5 V DC，较大		90 mA；在每个 DP 接口处	90 mA；在每个 DP 接口处	90 mA；在每个 DP 接口处
功耗
功耗，典型值		4.5 W	5.5 W	6.5 W
功耗，较大值		5.5 W	6.5 W	8 W
存储器
存储器类型		RAM	RAM	RAM
工作存储器
● 集成		8 MB	16 MB	16 MB
● 集成（用于程序）		4 MB	8 MB	8 MB
● 集成（用于数据）		4 MB	8 MB	8 MB
● 可扩展		-	-	-
装载存储器
● 可扩展 FEPROM		√；带存储卡(FLASH)	√；带存储卡(FLASH)	√；带存储卡(FLASH)
● 可扩展 FEPROM，较大		64 MB	64 MB	64 MB
● 集成 RAM，较大		1 MB	1 MB	1 MB
● 可扩展 RAM		√；带存储器卡 (RAM)	√；带存储器卡 (RAM)	√；带存储器卡 (RAM)
● 可扩展 RAM，较大		64 MB	64 MB	64 MB
后备
● 提供		√	√	√
● 带电池		√；所有数据	√；所有数据	√；所有数据
● 无电池		-	-	-
电池
后备电池
● 备份电流，典型值		180 μA；(较高 40 °C )	180 μA；(较高 40 °C )	180 μA；(较高 40 °C )
● 后备电流，较大		850 μA	850 μA	850 μA
● 后备时间，较长		模块数据手册中提供了辅助条件和影响因素	模块数据手册中提供了辅助条件和影响因素	模块数据手册中提供了辅助条件和影响因素
● CPU 外部备份电压进给		5 V DC 到 15 V DC	5 V DC 到 15 V DC	5 V DC 到 15 V DC
CPU 处理时间
位操作时，典型值		12.5 ns	12.5 ns	12.5 ns
字操作时，典型值		12.5 ns	12.5 ns	12.5 ns
**数运算时，典型值		12.5 ns	12.5 ns	12.5 ns
浮点数运算时，典型值		25 ns	25 ns	25 ns
CPU 块
DB
● 较大数量		10,000；数值范围：1 - 16000	10,000；数值范围：1 - 16000	10,000；数值范围：1 - 16000
● 较大大小		64 KB	64 KB	64 KB
FB
● 较大数量		5,000；数值范围：0 - 7999	5,000；数值范围：0 - 7999	5,000；数值范围：0 - 7999
● 较大大小		64 KB	64 KB	64 KB
FC
● 较大数量		5,000；数值范围：0 - 7999	5,000；数值范围：0 - 7999	5,000；数值范围：0 - 7999
● 较大大小		64 KB	64 KB	64 KB
OB
● 较大数量		见“指令表”	见“指令表”	见“指令表”
● 较大大小		64 KB	64 KB	64 KB
● 空循环 OB 的数量		1; OB 1	1; OB 1	1; OB 1
● 时间报警 OB 的数量		8; OB 10-17	8; OB 10-17	8; OB 10-17
● 延时报警 OB 的数量		4; OB 20-23	4; OB 20-23	4; OB 20-23
● 循环中断 OB 数		9；OB 30-38（可设置的较短周期 = 500 μs）	9；OB 30-38（可设置的较短周期 = 500 μs）	9；OB 30-38（可设置的较短周期 = 500 μs）
● 过程报警 OB 的数量		8; OB 40-47	8; OB 40-47	8; OB 40-47
● DPV1 报警 OB 的数量		3; OB 55-57	3; OB 55-57	3; OB 55-57
● 同步模式 OB 的数量		4; OB 61-64	4; OB 61-64	4; OB 61-64
● 多值 OB 的数量		1; OB 60	1; OB 60	1; OB 60
● 后台 OB 的数量		1; OB 90	1; OB 90	1; OB 90
● 启动 OB 的数量		3; OB 100-102	3; OB 100-102	3; OB 100-102
● 异步错误 OB 的数量		9; OB 80-88	9; OB 80-88	9; OB 80-88
● 同步错误 OB 的数量		2; OB 121, 122	2; OB 121, 122	2; OB 121, 122
嵌套深度
● 每个**级		24	24	24
● 在一个错误 OB 中附加		2	2	2
计数器、定时器及其保持性
S7 计数器
● 数量		2 048	2 048	2 048
保持性
— 可调节		√	√	√
— 下限		0	0	0
— 上限		2 047	2 047	2 047
— 预置		Z 0 - Z 7	Z 0 - Z 7	Z 0 - Z 7
计数范围
— 下限		0	0	0
— 上限		999	999	999
IEC 计数器
● 提供		√	√	√
● 类型		SFB	SFB	SFB
● 数量		不限（只取决于 RAM 容量）	不限（只取决于 RAM 容量）	不限（只取决于 RAM 容量）
S7 定时器
● 数量		2 048	2 048	2 048
保持性
— 可调节		√	√	√
— 下限		0	0	0
— 上限		2 047	2 047	2 047
— 预置		无保持定时器	无保持定时器	无保持定时器
时间范围
— 下限		10 ms	10 ms	10 ms
— 上限		9,990 s	9,990 s	9,990 s